Data and file management
R&S
®
RTE
493User Manual 1326.1032.02 ─ 20
Note: If the result box is minimized, only the columns shown on the result icon are
saved (2 columns). Statistical results are not shown on the minimized results icon, and
they are not saved.
Remote command:
EXPort:RESult:SELect on page 1409
Numeric values in decimal and without unit
By default, numeric result values are written with their unit to the file. If the option is
enabled, the values are saved with more decimal places.
Remote command:
EXPort:RESult:NUMeric on page 1409
CSV Customize
Opens a dialog for customizing the settings of the CSV file. See Chapter 12.2.6, "CSV
export", on page 496.
Export results
Enter the filename to save the results to. Double-tap the filename to open the file
selection dialog box.
By default, the filename has the prefix "ResultBoxExport_".
You can define a pattern for automatic naming in the "Autonaming" tab.
"Save"
Saves the selected results to the indicated file.
"Save As..."
Opens the file selection dialog box and saves the selected results to
the selected file. See also Chapter 12.7, "File selection dialog",
on page 511
".csv/.html"
Selects the file format.
●
CSV: the values are saved in a file
You can select the value delimiter and the list separator symbol in
the "CSV Export" dialog, see Chapter 12.2.6, "CSV export",
on page 496.
Tip for using MS Excel: It is recommended that you use the semi-
colon as csv decimal symbol. When you open the file with MS
Excel, use "File > Open" and follow the wizard to set the separa-
tors correctly, or set the separator settings with "Tools > Options >
International".
●
HTML: Results are saved as web page for display in a browser.
Remote command:
EXPort:RESult:NAME on page 1409
EXPort:RESult:SAVE on page 1409
12.2.5 Result analysis
Access: [FILE] > "Result Analysis"
You can export the data of long-term measurements, the measurement histogram and
track data to file.
Waveform data and results
To Next Page
Loading...
