Roland AT-80SL - Copying Rhythms Saved in User Memory to Floppy Disks; Loading a Set of Registrations

53
AT-80SL
If the following screen appears
If you select a number at which a registration has already been saved and
touch <Save>, the following screen appears.
fig.E-63
If you wish to update the contents of
the Registration data
1. Touch <OK>.
If you wish to save new data instead
of updating the registration
1. Touch <Cancel>.
Rewriting of the Registration will be canceled.
2. In the Registration Save screen, select the number that is displayed as “---
--” (a number that currently does not contain registration data).
3. Save the Registration.
When saving is complete, the saved registration name will be displayed.
Copying Rhythms Saved in User
Memory to Floppy Disks
You can take rhythms saved in User memory and copy them to floppy disks.
1. Make sure that the disk drive contains a floppy disk that was formatted
by the ATELIER.
2. Press the Rhythm [Disk/User] button.
The Rhythm screen appears.
fig.02-09_55
3. Touch < >.
4. Touch the Rhythm name to select the rhythm you want to copy to the
floppy disk.
fig.02-21-1
5. Touch < > (Utility) on the Rhythm screen.
The Utility screen appears.
fig.02-10_55
6. Touch <Copy to Disk>.
The Copy to Disk screen appears.
7. Touch < >< > to select the copy-destination number.
Numbers which have not been used in the saving operation will be
displayed as “-----.”
fig.02-34-2
To cancel the copy, touch the <Exit> button to close the Copy to Disk
screen.
8. Touch <Copy> to copy the rhythm to the floppy disk.
Copying of the rhythm to the floppy disk begins.
Loading Users Data
Loading Previously Saved
Registration Sets Into the AT-
80SL
Loading a Set of Registrations
1. Insert the floppy disk containing the Registration into the disk drive.
2. Touch <Registration> on the Main screen.
The sub-window appears.