Roland AT-80SL - DISASSEMBLY PROCEDURE; Main Unit Disassembly

26
Jun. 2005
DISASSEMBLY PROCEDURE
Main Unit Disassembly
1. Remove AC Cord.
And remove the three screws on Rear Board.
fig.80s-01e_50
2. Close Keyboard Lid and remove Top Board by sliding it.
fig.80s-02e_50
3. Remove Lid Stopper on both Lid Rail and remove Lid.
fig.80s-03e_5
fig.80s-04e_50
4. Remove the screw on both Side Holder.
fig.80s-06e_50
fig.80s-07e_50
5. Remove the 7 screws on Bottom Board.
fig.80s-08e_50