54
Jun. 2005
fig.03-04_55
3. Touch <Load>.
The Registration Load screen appears.
fig.03-05_55
4. Touch < >< > to select the Registration that you wish to
load into internal memory.
To cancel operation, touch <Exit>.
5. Touch <Load>.
The registration data will start being read.
When the Registration has been loaded, the Registration Load screen will
reappear.
Copying Rhythms on Disks into
User Memory
While the AT-80SL comes with rhythms already loaded in its User memory,
you can replace these with Music Style Disk rhythms. Rhythms loaded from
the disk into User memory will not be lost even if the power is turned off. It is
convenient to load frequently-used disk Rhythms into User memory.
1. Insert the Music Style disk into the disk drive.
2. Touch <Rhythm> on the Main screen.
The Rhythm screen appears.
fig.02-09_55
3. Touch < > (Utility) on the Rhythm screen.
The Utility screen appears.
fig.02-10_55
4. Touch <Copy to User>.
The Copy To User screen appears.
fig.02-23_55
5. Touch < >< > to select the Music Style Disk rhythm you
want to copy to the User memory.
Rhythm [Disk/User] button indicator will blink.
6. After selecting the Music Style Disk Rhythm, touch <Next>.
The following screen appears.
fig.02-24_55
Touch <Back> to go back to the previous screen.
7. Touch < >< > to switch screens, and touch the save-
destination rhythm.
The following screen appears.
fig.02-25_55
To cancel operation, touch <Cancel>.
To Next Page
Loading...
