60
Jun. 2005
fig.ver1
2. Press the [Drums/SFX] button to advance to the next item.
* To advance to the next item you will generally use the [Drums/SFX] button.
For some items, you will advance automatically, so refer to the
explanation of each item.
* If you wish to be back to previous test, press the [One Touch Program Set]
button.
If you wish to exit test mode during this procedure, turn off the power.
* It is possible to jump each item by pressing next keys in Upper section.
2.Device check
1. During the device check, the following display will appear.
Example
fig.test-dev
* If a problem is found, the following error display will appear.
BUTTON TEST ITEMS
[Full1] Version Check
[Full2] Device Check
[Full3] SW LED Check
[Jazz1] LED Check
[Jazz2] Sound Check
[Jazz3] A/D Check
[Pipe1] Serial Check
[Pipe2] Video Check
[Pipe3] Disk Check
[Theater1] LCD Check
[Theater2] LCD Calibration Check
[Others] Set a destination
[Slow Strings] Initialize the rhythm stored in the [Disk/User]
button
[Synth Strings] Version Check
[French Horn] Test Mode End
To Next Page
Loading...
