Roland CAMM-1 PNC-950 - 12 Specifications of Pnc-950

28
12 SPECIFICATIONS OF PNC-950
, , ,
PNC-950
Mechanism Media-movement method
Maximum cutting area Width: 584 mm (22-15/16")
Length: 24,998 mm (984-1/8")
Acceptable sheet widths 50 mm—610 mm (1-15/16"—24")
Acceptable paper widths 50 mm—610 mm (1-15/16"—24")
Acceptable paper types High-quality paper
Tools Cutters: carbide
Pens: Water-based fiber-tipped pens, Thick water-based fiber-tipped pens (options) and
32 color plotter pens (options)
Cutting speed 10 mm/sec—400 mm/sec
(When DIP switch SW-8 is at ON: 10 mm/sec - 100 mm/sec)
Blade force 30 gf—200 gf
Mechanical resolution 0.05 mm/step (Micro-step: 0.003125 mm/step)
Software resolution 0.025 mm/step
Distance accuracy Error of less than +/- 0.2% of distance travelled, or 0.1mm, whichever is grater
Repetition accuracy 0.1 mm or less (Excluding stretching/contraction of the sheet, and provided that sheet length
is under 1600 mm (62-15/16"))
Interface Parallel (Centronics compatible), Serial (RS-232C)
Buffer size 2 Kbytes (expandable up to 1 Mbyte)
Instruction system CAMM-GLIII (mode1and mode2)
Switches Power switch, pen force slider, DIP switches
Control switches SETUP, PAUSE, PEN MODE, ROTATE, TEST, ORIGIN SET,
LED POWER/ERROR LED, SETUP LED, PAUSE LED, PEN MODE LED, ROTATE LED
Power consumption 0.7 A /117 V, 0.4 A / 220 - 230 V, 0.4 A / 240 V
Acoustic noise level [Cutting mode]
When DIP switch SW-8 is at OFF: less than 68 dB (A)
When DIP switch SW-8 is at ON: less than 69 dB (A)
[Standby mode] less than 45 dB (A)
(according to ISO 7779)
Dimensions 805 mm (W) x 289 mm (D) x 217 mm (H)
(31-3/4" (W) x 11-7/16" (D) x 8-9/16" (H))
Weight 14 kg (30.9 lb.)
Operating temperature 5—40°C (41—104°F)
Operating humidity 35%—80% (non-condensing)