Tuning Your Instrument (Tuner Function)
(continued)
85
Advanced UsesRecording Listening Deleting Creating a CD Editing an SD Appendices
Convenient
Functions
Information
/ Display
Checking /
Preparations
2
Use the [+] [-] buttons to adjust the reference pitch as desired.
fig.menu-tuner06-e.eps
3
Press the [EXIT] button twice.
You’re returned to the audio source screen.
As a tuning aid, you can have the CD-2u/SD-2u sound a guide tone from the internal speakers.
1
Press the [MENU] button to access the menu screen, and choose “Tuner/
Tone?”
fig.menu-tuner01-e.eps
Press the [MENU] button to access the menu screen.
Use the [ ] [ ] buttons to choose “Tuner/Tone?”
Press the [ENTER] button to confirm your choice.
2
While the tuner screen is displayed, press the [ENTER] button.
(The tuner screen and the guide tone screen will alternate each time you press the
[ENTER] button.)
fig.menu-tuner05-e.eps
You’ll hear the guide tone shown in the screen.
3
Use the [+] [-] buttons to select the name of the note you want to use as
the guide tone.
4
Tune your instrument to the guide tone.
5
To stop the guide tone, press the [EXIT] button twice.
You’re returned to the audio source screen.
Value (units: Hz)
Explanation
435–440 (factory setting)–445
Decreasing this value will lower the pitch. Increasing this value
will raise the pitch.
Listening to a Guide Tone While Tuning
Value
Explanation
A3–A4 (factory setting)–A5 You can choose one of 25 chromatic notes in the range A3–A5.
Reference pitch
Guide tone
You can press the [GUIDE TONE] button to access the screen of step 2.
Important
CD-2u_SD-2u_e.book 85 ページ ２０１３年１月２４日 木曜日 午前１１時３４分
To Next Page
Loading...
