11
Editing a specified region of a sequence track
Cutting Segments—Cut
This operation cuts the phrases of the specified region. Any phrases that followed
the region will be moved forward.
1. Specify the region that you want to cut, as
described in “Specifying the editing
region” (p. 9) of this booklet.
2. Press [YES/ENTER].
A mini-menu appears.
3. Press CURSOR [ ] to select the
“REGION CUT?”
4. Press [YES/ENTER].
The specified region are cut.
Moving to a Another Location—Move
This operation moves the phrases of the specified region to another location. The
phrases in the specified region will be erased; i.e., they will change to silence. If there
were any phrases in the move-destination, they will be overwritten by the phrases
from the specified region.
1. Specify the region that you want to move,
as described in “Specifying the editing
region” (p. 9) of this booklet.
2. Use the REW[ ] /FF [ ] or the
TIME/VALUE dial to set the move-
destination “NOW” (current location).
3. Press [YES/ENTER].
A mini-menu appears.
4. Press CURSOR [ ] to select the
“REGION MOVE?”
5. Press [YES/ENTER].
The specified region are moved.
To Next Page
Loading...
Need help?
General
