Roland E-X30 - MIDI Out; Factory Reset

Function Menu
20
Fade Time
Set the time length (in seconds) for Fade In/Out.
1. In the function menu, use the data dial to select “FadeTime”.
2. Use the [˅] / [˄] buttons to change the time setting.
Tempo Lock
You can lock the tempo in the following ways:
1. In the function menu, use the data dial to select “TempoLck”.
2. Use the [˅] / [˄] buttons to change the setting.
Note: Lock will work when switching Register Memory.
Voice Lock
You can lock the tone in the following ways:
1. In the function menu, use the data dial to select “VoiceLck”.
2. Use the [˅] / [˄] buttons to change the setting.
Note: Lock will work when switching Register Memory.
Style Lock
You can lock the style in the following ways:
1. In the function menu, use the data dial to select “StyleLck”.
2. Use the [˅] / [˄] buttons to change the setting.
Note: Lock will work when switching Register Memory.
Transpose Lock
You can lock the transpose in the following ways:
1. In the function menu, use the data dial to select “TransLck”.
2. Use the [˅] / [˄] buttons to change the setting.
Note: Lock will work when switching Register Memory.
Mic Register
You can lock the Mic effect parameters in the following ways:
1. In the function menu, use the data dial to select “MRegist”.
2. Use the [˅] / [˄] buttons to change the setting.
Note: Lock will work when switching Register Memory.