Roland eBand JS-8 - Switching Effects; Effect Selection and SOLO Function

12
Play Your Guitar with Songs as Your Backing
Switching Back and Forth Between Two E ects
Different JS-8 effect numbers are stored depending on whether SOLO is on or off.
The JS-8 will assign a different effect patch number depending on whether the SOLO button is on or off. Thus, you can
instantly switch between two different effects each time you press [ SOLO].
USER 001
USER 100
PRESET 001
PRESET 100
SOLO ON
Eect Patch
SOLO On/O
Switching Between Two Eects
with the SOLO Button
PRESET 005
SOLO OFF
USER 001
With the MENU button...
Pressing [EFFECT] and then [MENU] allows you to carry out
the following procedures.
MENU Category Description
WRITE
Saves the effect currently being edited.
Also copies the currently selected effect.
EXCHANGE
Exchanges one effect for another.
INITIALIZE
Initializes the effect settings.
The MENU categories that are displayed may differ accord-
ing to the screen and cursor position.
Switching E ects
Use the
dial to select
the effect.
The SOLO icon
will light if SOLO
is on.
Effect
category
Effect patch
number
Switch to the SOLO E ect
1. Press [ SOLO].
Select E ects
1. Press [EFFECTS].