Roland eBand JS-8 - Changing and Saving Effects

13
Play Your Guitar with Songs as Your Backing
Deutsch Français Italiano PortuguêsEspañol NederlandsEnglish
You can create sounds by choosing song genres and using intuitive sound-shaping grids that adjust multiple parameters with
a single control.
Switching E ects
You can create sounds by choosing song genres and using intuitive sound-shaping grids that adjust multiple parameters with
Changing E ects to Get the Desired Sound
1. Press [EFFECTS].
2. Press the right cursor button.
Saving E ects
1. After editing the effect patch, press [MENU].
2. Select WRITE with the dial and press [ENTER].
Switching effect patches with PATCH SELECT before you
save an edited effect patch will cause the edited content
to be lost.
You can edit effect patches even more precisely.
Please refer to “Advanced Editing of Effect Parameters” (p.
20)
Distortion:
Hard
You can then select a sound
that is similar to what you
have in mind.
Distortion:
Soft
For backing
Hard
For backing
To adjust the sound,
move the cursor's posi-
tion with the cursor
buttons and dial.
Choose the basic
music style (Cat-
egory).
For solos
Delay time:
Long
Delay time:
Short
Delay sound:
Dry (light)
Delay sound: Wet
(strong)
Press the right cur-
sor button to edit the
effect patch(Screen 2).
Press the right
cursor button to
switch to Screen 3.
Screen 1
Screen 3
Screen 2
Use the left and
right cursor but-
tons and the dial to
name the effect.
Press [ENTER] to save
the effect to the selected
effect patch number.
Select the effect
patch number that
you want to save
your changes to.
You can save the
result by pressing [MENU]
and selecting WRITE.
Delay time:
Long
Delay sound:
To adjust the sound,
move the cursor's posi-
tion with the cursor
buttons and dial.