Roland FA-07 - Selecting a Tone from a List

Playing One Tone (Single Play)
23
Performance
Functions
Editing
Sequencer
(Creating Songs)
Sampler Pads DAW
Appendix
Overview Performing SettingsPerforming
Selecting a Tone from a List
You can view a list of tones and select one of them.
1. Make sure that the [SPLIT] button and [DUAL] button are
unlit.
2. Press a tone button to select a category group.
3. Press the [ENTER] button.
The TONE LIST screen appears.
MEMO
You can also access the TONE LIST screen by moving the cursor
to the tone and pressing the [ENTER] button.
4. Use the cursor [ ] [ ] buttons to select a category.
5. Use the dial or the [DEC] [INC] buttons to select a tone,
and press the [ENTER] button.
MEMO
For more about the tones, refer to “Sound List” (PDF).