Roland FA-07 - Playing Songs

56
Playing Songs
Selecting and Playing Songs
Here’s how to select and play a song.
1. Press the [SONG SELECT] button.
The SONG SELECT screen appears.
2. Turn the dial to select a song.
3. Press the [7] (Load) button.
A conrmation message appears.
4. Press the [6] (OK) button.
The song is selected.
5. Press the [ ] button.
The song starts playing.
Button operations
Button Explanation
[
]
Returns the song position to the beginning.
[
]
Rewinds the song.
[
]
Fast-forwards the song.
[
]
Stops the song.
MEMO
The screen shows information about the song.
Song number, song name
Song status (playing/
recording/stopped)
Time
signature
TempoCurrent location “measure-beat-
tick”
Setting the Tempo of the Song
Here’s how to set the tempo of the song.
1. Turn the [TEMPO] knob.
MEMO
• You can set the tempo by pressing the [TAP] button at the
desired interval (tap tempo). Press the button three or more
times at quarter-note intervals of the desired tempo.
• When you press the [TAP] button, the Tempo window appears.
In this state, you can hold down the [SHIFT] button and turn the
dial to adjust the value below the decimal point. If you press the
[6] (Click) button, a click is sounded at the specied tempo. The
click turns on/o each time you press the button.
• The specied tempo is saved in the song.