Roland FA-07 - Editing the System Effects

Editing the Eects
54
Editing the System Eects
Here’s how to edit the system eects (eect applied to the entire
unit).
1. Access the EFFECTS EDIT screen (p. 52).
2. Press the eect button.
The SYSTEM EFFECTS screen appears.
Button Explanation
[5] (Master EQ)
Edits the equalizer that is applied to the entire sound
engine of the FA.
[6] (TFX) Edits the TFX (total eect) settings.
[SHIFT] + [4]
(Input)
Species the input volume from the AUDIO INPUT
jack.
[SHIFT] + [5] (NS) Edits the noise suppressor settings.
[SHIFT] + [6]
(MIC Reverb)
Applies reverb to the microphone or other device
that’s connected to the AUDIO INPUT jack.
3. Use the cursor buttons to select a parameter, and use the
dial to edit the value.
MEMO
For details on the parameters, refer to “Parameter Guide”
(PDF).