Roland FA-07 - Saving the DAW CONTROL Settings

Using the FA with DAW Software
92
Saving the DAW CONTROL Settings
The DAW CONTROL settings revert to their previous state when you
turn o the power. If you want the DAW CONTROL settings to be
remembered even after power-o, save them.
1. In the DAW CONTROL screen, press the [Write] button.
A conrmation message appears.
If you decide to cancel, press the [7] (Cancel) button.
2. Press the [6] (OK) button.
The DAW CONTROL settings are saved.
MEMO
When you save the DAW CONTROL settings, the system settings
are also saved.
NOTE
Never turn o the power while settings are being saved.