Roland Fantom Owner's Manual

18
Taking advantage of the Fantom
Can different Patch Chorus and Reverb Send
level settings be made, one set for when multi-
effects are used, and one for when they are not
used?
You can set two values for Patch Chorus and Reverb Send
levels, one for use with multi-effects, and one for use in other
cases. Since in many cases sounds are not passed through the multi-
effects when Patches are used in Performances/Multitimbres, using
two Chorus and Reverb Send settings, one to use when sounds are
passed through the multi-effects and one when not, allows you to
get the optimum settings for each of the Performance/Multitimbre
and Patch modes. The settings values for Chorus and Reverb
parameters shown when you switch Part Output Assign parameter
(PERFORMANCE, MULTITIMBRE/Effects) between MFX (multi-
effects) and other setups.
Three multi-effects can be used in Performance
mode and Multitimbre mode, but can these be
connected in series?
No.
In Performance mode/Multitimbre mode, the output of each
part is input in parallel to the three multi-effects. For example, you
could do something like setting the output of Parts 1 and 2 to MFX-
A, the outputs of Parts 3 and 4 to MFX-B, the output of Part 5 to
MFX-C, and connect the other parts directly to the outputs,
bypassing the Multi-effects.
With the Multi-effects, can I add rotary to
distorted sounds, such as those from the
distortion effects?
Yes. Use multi-effect 72:ROTARY MULTI.
In addition, there are other multi-effects in which multiple
effect devices are connected in series.
Rock Organ
72: ROTARY MULTI
Overdrive (Distortion) ➝ Amp Simulator ➝ 3-Band EQ ➝ Rotary
Keyboard
73: KEYBOARD MULTI
Ring Modulator ➝ 3-Band EQ ➝ Pitch Shifter ➝ Phaser ➝ Delay
74: RHODES MULTI
Enhancer ➝ Phaser ➝ Chorus ( Flanger) ➝ Tremoro (Auto Pan)
Synthesizer
75: JD MULTI
Distortion ➝ Phaser ➝ Spectrum ➝ Enhancer
* The order of each effects device can be changed.
Guitar
81: GUITAR MULTI A
Compressor ➝ Overdrive (Distortion) ➝ Amp Simulator ➝ Delay ➝
Chorus (Flanger)
82: GUITAR MULTI B
Compressor ➝ Overdrive (Distortion) ➝ Amp Simulator ➝ 3-Band
EQ ➝ Chorus (Flanger)
83: GUITAR MULTI C
Overdrive (Distortion) ➝ Wah ➝ Amp Simulator ➝ Delay ➝ Chorus
(Flanger)
84: CLEAN GUITAR MULTI A
Compressor ➝ 3-Band EQ ➝ Delay ➝ Chorus (Flanger)
85: CLEAN GUITAR MULTI B
Wah ➝ 3-Band EQ ➝ Delay ➝ Chorus (Flanger)
Bass
86: BASS MULTI
Compressor ➝ Overdrive (Distortion) ➝ Amp Simulator ➝ 3-Band
EQ ➝ Chorus (Flanger)

Roland Fantom Specifications

General

Brand	Roland
Model	Fantom
Category	Synthesizer
Language	English