Roland FC-300 - Copying MIDI Streams

39
Patch Mode
You can copy an edited stream to a different patch or different stream.
1
In the Patch Mode’s top screen, press PARAMETER [ ].
2
Press PARAMETER [ ] [ ] to select the stream to be used as the copy
source, then press [WRITE].
3
Press PARAMETER [ ] [ ] to select “Copy MIDI,” then press [WRITE].
4
Press VALUE [ ] [ ] to select the stream to be used as the copy source,
then press [WRITE].
5
Press VALUE [ ] [ ] to select the stream to be used as the copy
destination, then press [WRITE].
6
“Sure?” appears in the display; press [WRITE] once more.
7
After making the changes, follow the instructions in “Storing (Saving)
Patches” (p. 44) to save the MIDI messages to a patch.
How to Copy MIDI Streams
FC-300_e1.book 39 ページ ２００７年４月２４日 火曜日 午前１０時１０分