Roland GAIA 2 - Connection example: USB MEMORY;EXT DEVICE port (USB A)

44
Navi
Connection example: USB MEMORY/EXT DEVICE port (USB A)
Connecting a USB ash drive Connecting the Roland Cloud Connect (WC-1)
Connecting to a MIDI controller
* For more details, see the related manuals on the
Roland website.
https://roland.cm/wc1
* You can power a MIDI controller from the GAIA-2, provided that the MIDI controller’s power
consumption is 500 mA or less.
* Congure the GAIA-2 system parameters when using a MIDI controller. When connecting a general
external MIDI keyboard, set the “Remote Kbd” SYSTEM MIDI parameter to “USB MEM”.
¹ You can connect a USB ash drive to the instrument for exchanging data, creating a backup and so on.
¹ You can also connect a MIDI keyboard or other external MIDI controller for use with this instrument.
¹ Further, you can connect a Roland Cloud Connect (WC-1) to access and use your Roland Cloud contents via Wi-Fi.
USB MEMORY/EXT
DEVICE port
USB MEMORY/EXT
DEVICE port
WC-1
Roland Cloud
USB MEMORY/EXT
DEVICE port
USB cable
USB A — USB Type-C® / USB B
A-88MKII / another MIDI controller