Roland GAIA 2 - Icons used in this manual

6
Navi
When you touch (click) on screens that are outlined with a border, this jumps to the related operation page or parameter list.
Touch (click) the Navi icon at the top right-hand corner of the pages to jump to the Navi map.
When you touch (click) on other icons shaped like these, this jumps to the related operation page or parameter list.
Icon Explanation
VALUEVALUE
Turn the [VALUE] (ENTER) knob.
ENTERENTER
Press the [VALUE] (ENTER) knob.
* You may need to double-click in
some cases.
Button nameButton name
Press the button that’s shown.
SHIFT +
Button name
Hold down the [SHIFT] button and press
the button shown.
[SHIFT]
* You may need to hold down another button
besides [SHIFT] in some cases.
* You may also need to hold down two buttons
for a separate operation in some cases.
Icon Explanation
KnobKnob
Operate the knob or slider.
PADPAD
Operate the motional pad.
Swipe Tap Double-tap
Place your nger
on the pad and
slide it in the
desired direction.
Lightly touch
the pad with
your nger.
Tap the pad
twice.
KeyboardKeyboard
Play the keyboard.
The following icons are used in the illustrations of this manual to describe the operating steps.
Icons used in this manual
Screens with a border Screens without a border
Navi
Common
OSC
[SHIFT] +
MONO
[SHIFT] +
PORTAMENTO
Looper
MFX List
Jumping between pages