Roland GAIA 2 - Page 51

51
Navi
Parameter Value Explanation
OSC MODULATIONOSC MODULATION
Ring/Sync
Sets how the modulation that applies to OSC2 and OSC3 works.
OFF Nothing is applied.
RING Ring modulation is applied.
SYNC OSC sync is applied.
XMOD Type
XMOD1, XMOD2 Selects the cross-modulation type.
XMOD1 Depth
0–255 Adjusts the depth of XMOD1.
XMOD2 Depth
0–127 Adjusts the depth of XMOD2.
XMOD2 Sens
-63–0–+63 Adjusts the OSC envelope depth.
XMOD2
Velocity Sens
-100–0–+100 Adjusts the intensity of XMOD2 Depth, according to how hard you play the keys.
* The following limitations exist for the Sync and XMOD2 eect, according to the waveform you select for OSC2, 3.
Sync
OSC3
SIN TRI SAW PULSE S-SAW NOISE
OSC2
SIN
µ µ µ µ
— —
TRI
µ µ µ µ
— —
SAW
µ µ µ µ
— —
PULSE
µ µ µ µ
— —
SUPER-
SAW
— — — — — —
NOISE — — — — — —
XMOD2
OSC3
SIN TRI SAW PULSE S-SAW NOISE
OSC2
SIN
µ µ µ µ µ µ
TRI
µ µ µ µ µ µ
SAW
µ µ µ µ µ µ
PULSE
µ µ µ µ µ µ
SUPER-
SAW
— — — — — —
NOISE — — — — — —
OSC ENVELOPEOSC ENVELOPE
OSC Env Sel
This selects the parameter that’s applied to the OSC envelope.
PITCH, OSC1 POS, OSC2 SHAPE, OSC3 SHAPE, OSC1 P-MOD X, OSC1 P-MOD Y, OSC1 S-MOD DPT, OSC1
S-MOD DRV
O-Env Attack
Time
0–255
Adjusts the time it takes for the value set in Env depth to be reached after you
press a key.
O-Env Decay
Time
0–255
Adjusts the time it takes to return to the initial value from the value set in Env
depth.
OSC1 Pitch Env
Enable
OFF, ON Sets whether to apply the pitch envelope (ON) or not (OFF) to OSC1.
Pitch Env Depth
-100–0–+100
When you turn the knob clockwise, the pitch goes up and then returns to the
pitch of the key you press.
When you turn the knob counterclockwise, the pitch goes down and then
returns to the pitch of the key you press.
* The eective pitch env depth range for OSC1 is -63–+63.
* The pitch may not reach the value that you set, depending on the sound parameter
settings.
Pitch Env
V-Sens
-100–0–+100
Adjusts how much the pitch envelope is applied in response to how hard you
play the keys.
OSC1 WT Pos
Env Depth
-63–0–+63 Adjusts the depth of change to wavetable position by the OSC envelope.
OSC2 Shape
Env Depth
-63–0–+63 Adjusts the depth of change to OSC2 shape by the OSC envelope.
OSC3 Shape
Env Depth
-63–0–+63 Adjusts the depth of change to OSC3 shape by the OSC envelope.
OSC1 P-Mod X
Env Depth
-63–0–+63 Adjusts the depth of change to phase modulation X by the OSC envelope.