Roland HP702 - Initializing Memory (Format Media); Restoring Factory Settings (Factory Reset)

23
Convenient Functions
Initializing the Memory (Format Media)
Here’s how to erase all of the les that you saved in internal memory
or on a USB ash drive (sold separately).
NOTE
5 When you initialize, all registrations or les that you saved in
internal memory or on a USB ash drive are lost.
5 If you want settings other than the memory settings to be
returned to their factory-set state, execute a Factory Reset
(p. 23).
1. If you want to initialize a USB ash drive, connect
the USB ash drive to the USB Memory port.
2. Press the [ ] button.
The [ ] button is lit, and the piano is in function mode.
3. Turn the [ ] knob to access “Format Media” screen,
and then press the [ ] knob.
The Format Media screen appears.
If you decide to cancel, press the [ ] button.
4. Turn the [ ] knob to select the media (Internal
Memory or USB Memory) that you want to format.
5. Press the [ ] knob to conrm.
A conrmation message appears.
If you decide to cancel, press the [ ] button.
6. Turn the [ ] knob to select “Yes,” and press the [ ]
knob to conrm.
The memory is formatted.
NOTE
Never disconnect the USB ash drive or turn o the power while
the screen indicates “Executing...”
7. Press the [ ] button to exit function mode.
The [ ] button goes dark.
Restoring the Factory Settings (Factory Reset)
Here’s how to restore all registrations and internally saved settings to
the factory-set condition. This function is called “Factory Reset.”
NOTE
Factory Reset erases all settings that you have stored, and returns
them to the factory-set condition. For details on the settings that
are reset, refer to “Settings Saved Even If the Power Is Turned O”
(p. 28).
MEMO
Executing this function does not erase the les in internal memory
or on a USB ash drive (sold separately). If you want to erase all les
from internal memory or from a USB ash drive, refer to (“Initializing
the Memory (Format Media)” (p. 23)).
1. Press the [ ] button.
The [ ] button is lit, and the piano is in function mode.
2. Turn the [ ] knob to access “Factory Reset” screen,
and then press the [ ] knob.
A conrmation message appears.
If you decide to cancel, press the [ ] button.
3. Turn the [ ] knob to select “Yes,” and press the [ ]
knob to conrm.
The memory is reset to its factory values.
NOTE
Never turn o the power while the screen indicates “Executing...”
4. Turn the power o, then on again.