8
° Performing
Playing Various Tones
Selecting a Tone
In addition to piano sounds, the piano lets you enjoy performing with
many other sounds. There are four groups of tones; each tone button
selects a group.
& Refer to the “Tone List” at the end of this manual.
Tone groups
Button Explanation
[Piano] button Grand piano tones
[E. Piano] button Electric piano tones
[Strings] button
The tones of string instruments such as violins,
as well as other instruments used in orchestras
[Other] button
Selects a variety of tones such as organ or
accompaniment sounds.
* If you’ve selected an organ sound that
provides a rotary eect which simulates the
sound of rotating speakers, pressing the
[Other] button will switch the speed of the
rotary eect
[Registration]
button
Performance settings that you registered
1. Press a tone button (e.g., [Piano]).
The tone group is selected. The name of the currently selected
tone is shown.
Tone name
2. Turn the [ ] knob.
You can select other tones in the tone group.
Selecting tones from the [Other] button
Category
Tone name
Turn the [ ] knob
Selects the next tone.
When you reach the last tone in the
category, tones from the next category are
selected.
Press the [
] knob
Selects the tone category. You can turn the
[
] knob to change to another category.
Saving Your Performance Settings (Registration)
Lets you register your favorite performance settings so that you can
easily recall those settings while you perform.
Such settings are called a “Registration.” You can save a total of 36
registrations, 9 each in buttons [1]–[4]. These 36 registrations are
collectively called a “Registration set.”
=
Registration set
36 registration
1-1 2-1 3-1 4-1
1-9 2-9 3-9 4-9
Settings that are saved in a registration
Setting Page
The selected tone (including Split or Dual tones) p. 8, p. 10
Ambience p. 16
Rotary Speed p. 8
Key Touch p. 16
Transpose p. 11
Split on/o p. 10
Split point p. 10
Left Shift p. 10
Right Shift p. 10
Dual on/o p. 10
Tone 1 Shift p. 10
Tone 2 Shift p. 10
Balance (Split, Dual) p. 10
Twin Piano on/o p. 24
Twin Piano Mode p. 24
Damper Pedal Part p. 25
Center Pedal p. 25
Left Pedal p. 26
MIDI Transmit Ch. p. 26
Recalling and editing a registration
1. Press the [Registration] button.
2. Press a number button ([1] to [4]) to choose the
location where the desired registration is saved.
3. Turn the [ ] knob to select the registration
variation.
The selected registration is recalled.
MEMO
You can also use a pedal to recall registrations (p. 26).
4. To edit the selected registration, press the [ ] knob
and then turn the [ ] knob toward the right.
MEMO
If you press the [Registration] button to exit the Registration
screen, you will return to the state prior to recalling the
registration.
To Next Page
Loading...
Need help?
General
