Roland HP702 - Settings Saved Even if the Power Is Turned off

28
Making Various Settings (Function Mode)
Disabling the buttons (Panel Lock)
To prevent settings from being accidentally changed while you
perform, you can disable all buttons other than the [
L
] button and
the [ ] knob.
Lock the panel
Hold down the [
] button until the
screen shows the “ ” symbol.
Unlock the panel
Hold down the [
] button until the “ ”
symbol disappears.
Settings Saved Even If the Power Is Turned O
This piano remembers the “settings that are saved automatically” even when the power is turned o and then on again. If you set the “Auto
Memory Backup” setting, the settings saved by “auto memory backup” are also saved. Other settings return to their default values when you
turn the power o and on again.
Settings that are saved automatically
This piano automatically saves the following settings. These
settings are remembered even if the power is turned o.
Setting Page
Speaker volume p. 6
Headphone volume p. 7
Bluetooth On/O p. 24
Bluetooth ID p. 24
Power O by the Lid p. 27
Auto O p. 27
Settings that are saved by “Auto Memory Backup”
If the “Auto Memory Backup” function (p. 27) is on, the following
settings are saved.
Setting Page
Key Touch p. 16
Ambience p. 16
Headphones 3D Ambience p. 16
Brilliance p. 16
Master Tuning p. 16
Temperament p. 17
Temperament Key p. 17
Hammer Response p. 17
Balance (Split, Dual) p. 10
Metronome (volume, tone, downbeat) p. 11
Twin Piano Mode p. 24
Input/Bluetooth Vol. p. 24
SMF Play Mode p. 25
Damper Pedal Part p. 25
Reg. Pedal Shift p. 26
MIDI Transmit Ch. p. 26
Language p. 26
Display Contrast p. 26
Screen Saver p. 26
Volume Limit p. 26