Roland HP702 - Power and Backup Settings

27
Making Various Settings (Function Mode)
Indication Value Explanation
Power O by
the Lid
Turning O the Power When You Close the Keyboard Cover (Power O by the Lid)
You can choose whether the power turns o when you close the keyboard cover.
Ineective
The power does not turn o when you close the keyboard cover. To turn o the power, press the [
L
] button.
* If Auto O is specied, the power automatically turns o when a certain length of time has elapsed after you
stop playing or operating the instrument.
Eective The power turns o when you close the keyboard cover.
Auto O
Making the Power Automatically Turn o After a Time (Auto O)
With the factory settings, the unit’s power will automatically be switched o 30 minutes after you stop playing or operating the
unit. If you don’t want the power to turn o automatically, change the “Auto O” setting to “O” as follows.
O, 10, 30, 240 (min)
Auto
Memory
Backup
Saving Settings Automatically (Auto Memory Backup)
You can make settings be saved automatically so that the settings will not change when you turn the power o and on again.
O Settings are not saved. When you turn the power o and on again, settings will return to their default values.
On
The settings are saved automatically. This is convenient, since you don’t need to make the settings each time you
turn on the power.
For details on the settings that are saved, refer to “Settings that are saved by “Auto Memory Backup”” (p. 28).
Registration
Export
You can save all registrations held in registration memory into a registration set on a USB ash drive. (p. 9)
Registration
Import
Loads a registration set from the USB ash drive into the piano’s [Registration] button. (p. 9)
Piano Setup
Export
You can save your own piano settings in a USB ash drive, or load them into the other digital piano. (p. 22)
* Settings can be loaded only into another piano of the same model.
Piano Setup
Import
Format
Media
All les saved in the piano’s internal memory or on a USB ash drive (sold separately) can be deleted. (p. 23)
Factory Reset Settings saved in the piano can be returned to their factory-set state. (p. 23)
Version
Displays the version of the unit’s system program.
If a new system program becomes available, it can be used to update your piano. For details, refer to the following URL.
http://www.roland.com/support/ Enter the model name
0
refer to “Updater and Driver”