7
Before You Play
Using the Headphones
Use headphones if you want to perform without the sound being
heard nearby. This piano has two headphone jacks, two people can
also use headphones simultaneously.
1. Connect your headphones to the headphone jack.
When you connect headphones, sound is no longer heard from
the piano’s speakers.
2. Use the [ ] knob to adjust the volume of the
headphones.
MEMO
Whenever you are not using the headphones, you can hang them
on the headphone hook.
Headphone hook
Using the Pedals
By pressing the pedals, you can apply eects to the sound of the
piano.
Soft pedal
Sostenuto pedal
Damper pedal
Damper pedal
(right)
Use this pedal to sustain the sound. While this
pedal is held down, notes will be sustained
for an extended time even if you release your
ngers from the keyboard.
The resonance of the sound is aected by how
deeply you press the pedal.
Sostenuto pedal
(center)
The notes you are pressing when this pedal is
depressed will be sustained.
Soft pedal
(left)
This pedal is used to make the sound softer.
Playing with the soft pedal depressed produces
a sound that is not as strong as when otherwise
played with the equivalent strength. The
softness of the tone can be varied subtly by the
depth to which you press the pedal.
* When operating the pedal, take care not to pinch your ngers
between the moving part and the body of the unit. Pay special
attention to this when using the unit where children are present.
NOTE
Under the pedals there is an adjuster for securing the pedals. As
you use the piano, the adjuster might creep upward, allowing the
pedals to wobble when you step on them. If this occurs, turn the
adjuster to lower it into rm contact with the oor. In particular
if the piano is placed on carpet, you should lower the adjuster so
that it rmly presses down on the oor.
Adjuster
Basic Operations of Functions
To operate the functions of this piano, you use the [ ] (select/
conrm) knob and the [ ] (back) button.
Change an on-screen item or value Turn the [ ] knob
Conrm Press the [
] knob
Return to the previous screen / Exit
the current screen
Press the [
] knob
Return to the default value Long-press the [
] knob
Turning the Power O
1. Long-press the [
L
] button.
* This piano lets you turn o the power simply by closing the
keyboard cover.
* Never disconnect the power cord 10 seconds after turning the
power o. Malfunctions might occur if you disconnect the power
cord while the system is still processing.
NOTE
Take care that foreign objects, such as sheet music or other
papers, do not enter the piano through openings in the keyboard
cover. Also, do not open the cover while papers are placed on the
cover. Doing so might make the papers impossible to remove,
causing malfunctions.
To Next Page
Loading...
Need help?
General
