To Next PageTo Next PageWhy is the image smudged during printing on my Roland Plotter?
If the printed image from your Roland Plotter is smudged, it's likely due to dirty print head nozzle faces, wipers, or the cap unit. Clean the wipers, the capping station, and the areas around the print heads. Additionally, perform a head cleaning.
Why are the images blurred when printing from my Roland Plotter?
If your Roland Plotter is printing blurred or misaligned images soon after starting, it's likely because the ink inside the print head has become viscous due to the time spent in standby mode. Print a test pattern before starting to check for ink ejection defects such as nozzle clogging.
Why does my Roland Plotter show "Designated RIP data does not exist"?
If your Roland Plotter displays the message "Designated RIP data does not exist", it means the specified RIP file is missing, there's a hard disk issue, or there's a connection problem. Try reselecting the RIP file or ensuring the machine is securely connected with the included USB cable.
Why does my Roland Plotter say "Printing image width of current task is more than the available width"?
If your Roland Plotter displays the message "Printing image width of current task is more than the available width", it indicates that the specified RIP file's width exceeds the set media size. Ensure the set media width is correct, change to broader media, or use the partial printing function.
Why is the printed image blurred on my Roland Plotter?
If the printed image from your Roland Plotter is blurred, or double lines appear on the image, it means that the ink drop position is misaligned between color nozzles. Perform [Color Offset].
General| Maximum Print Width | 1000 mm |
|---|---|
| Print Resolution | 1440 dpi |
| Connectivity | Ethernet, USB |
| Media Width | 1000 mm |
| Media Thickness | 1 mm |
| Interface | Ethernet |
| Weight | 386 lb (175 kg) |
Information to review before beginning operation, including manual reading and setup.
Instructions and safety precautions for connecting the machine's power cord.
Details on the types of UV ink compatible with the machine.
Overview of the Print Control software and its capabilities.
Step-by-step guide for installing the Print Control software from the CD.
Step-by-step guide for preparing and executing a print job.
Instructions and safety precautions for powering the machine on and off.
Performing test prints to check for nozzle clogging and print quality issues.
Procedure for cleaning print head nozzles to resolve printing problems.
Instructions on how to correctly set printing media on the machine's table.
Saving and loading Print Control configurations for backup and recovery.
Solutions for issues preventing the machine from powering on.
Troubleshooting steps for common operational problems and error messages.
Addressing issues related to print quality, such as blurring or fading.
Procedures to resolve persistent nozzle clogging after cleaning attempts.
Steps to remove air bubbles that cause ink mixing or missing nozzles.
Adjusting ink drop position misalignment between color nozzles.
Correcting subtle misalignments in bidirectional printing passes.
Display of messages indicating the machine's status and system events.
Detailed error messages, their causes, and recommended solutions.
