Roland J-6 - Functions and Menus; Using Functions; List of Functions

Functions and Menus
17
Functions and Menus
Using the functions
1. Hold down the [SHIFT] button and press the keyboard button to which the function you want to execute
is assigned.
2. Use the [TEMPO/VALUE] knob to set the values, or use the [D (ENTER)] button (for CLEAR, WRITE and
MENU) to confirm.
The unit returns to the previous screen after CLEAR or WRITE are executed.
3. When you are finished, press the [C (EXIT)] button.
List of functions
Operation
Explanation
[SHIFT] + [C (EXIT)]
Exits the menu.
[SHIFT] + [D (ENTER)]
Confirms the editing of a value or the selection of an item.
[SHIFT] + [E (SHUFFLE)]
Configures the shuffle settings.
Press [C (EXIT)] to exit.
[SHIFT] + [F (LAST)]
Sets the length (the last step) of the selected pattern.
* Press [C (EXIT)] to exit.
[SHIFT] + [G (CLEAR)]
Initializes the selected pattern.
If a step is selected, the selected step is initialized.
[SHIFT] + [A (KEY)]
This transposes the keyboard.
Edit the setting using the [TEMPO/VALUE] knob.
* Press [C (EXIT)] to exit.
[SHIFT] + [B (MENU)]
Displays the menu.
[SHIFT] + [C (WRITE)]
Saves the pattern.
Press the [D (ENTER)] button to save.
Press the [C (EXIT)] button to cancel.
[SHIFT] + [C# (OCTAVE-)]
[SHIFT] + [D# (OCTAVE+)]
Changes the octave at which the notes sound that you play using the keyboard buttons.