Roland J-6 User Manual

Selecting Sounds
8
Selecting Sounds
Switching between sounds
1. Press the [SOUND] button.
The unit enters sound select mode.
2. Press the step [1]–[8] buttons to switch between sounds.
You can also use the [TEMPO/VALUE] knob to switch between sounds.
3. Press the [SOUND] button once again.
The unit returns to the previous screen.
You can also hold down the [SHIFT] button and press the [C (EXIT)] button on the left side of the keyboard to go back to the
previous screen.
Switching between banks
1. Hold down the [SOUND] button and press the step [1]–[8] buttons.
The selected bank lights up while you press the [SOUND] button.
2. Take your finger off the [SOUND] button.
Once you take your finger off the [SOUND] button, the unit enters sound select mode.

Roland J-6 Specifications

General

Product type	Digital synthesizer
Product color	Black
Sound effects	Delay, Reverberation
Sound effects quantity	64
Keyboard number of keys	-
Input voltage	5 V
Operating time	4.5 h
Power source type	Battery, USB
Display type	LED
Built-in display	Yes

Weight and Dimensions

Depth	106 mm
Width	188 mm
Height	36.2 mm
Weight	295 g