Roland juno-ds61 - Sample Edit; Filter Envelope Parameters (TVF ENV)

26
Sample Edit
Parameter Value/Explanation
Cuto Keyfollow
Use this parameter if you want the cuto frequency to change according
to the key that is pressed. Relative to the cuto frequency at the C4 key
(center C), positive (+) settings will cause the cuto frequency to rise
for notes higher than C4, and negative (-) settings will cause the cuto
frequency to fall for notes higher than C4.
Larger settings will produce greater change.
-200–+200
Cuto frequency
(Octave)
Key
Cuto V-Curve
Selects one of the following seven curves that determine how keyboard
playing dynamics (velocity) inuence the cuto frequency.
Set this to “FIXED” if you don’t want the Cuto frequency to be aected by
the keyboard velocity.
FIXED, 1–7
Cuto V-Sens
Use this parameter when changing the cuto frequency to be applied as a
result of changes in playing velocity. If you want strongly played notes to
raise the cuto frequency, set this parameter to positive (+) settings. If you
want strongly played notes to lower the cuto frequency, use negative (-)
settings.
-63–+63
Resonance V-Sens
This allows keyboard velocity to modify the amount of Resonance. If you
want strongly played notes to have a greater Resonance eect, set this
parameter to positive (+) settings. If you want strongly played notes to
have less Resonance, use negative (-) settings.
-63–+63
TVF ENV
Parameter Value/Explanation
TVF Env Depth
Species the depth of the TVF envelope. Higher settings will cause the TVF
envelope to produce greater change. Negative (-) settings will invert the
shape of the envelope.
-63–+63
TVF Env V-Curve
Selects one of the following 7 curves that will determine how keyboard
playing dynamics will aect the TVF envelope. Set this to “FIXED” if you
don’t want the TVF Envelope to be aected by the keyboard velocity.
FIXED, 1–7
TVF Env V-Sens
Species how keyboard playing dynamics will aect the depth of the
TVF envelope. Positive (+) settings will cause the TVF envelope to have a
greater eect for strongly played notes, and negative (-) settings will cause
the eect to be less.
-63–+63
TVF Env T1 V-Sens
This allows keyboard dynamics to aect the Time 1 of the TVF envelope.
If you want Time 1 to be speeded up for strongly played notes, set this
parameter to a positive (+) value. If you want it to be slowed down, set this
to a negative (-) value.
-63–+63
TVF Env T4 V-Sens
The parameter to use when you want key release speed to control the
Time 4 value of the TVF envelope. If you want Time 4 to be speeded up
for quickly released notes, set this parameter to a positive (+) value. If you
want it to be slowed down, set this to a negative (-) value.
-63–+63
TVF Env Time
Keyfollow
Use this setting if you want the TVF envelope times (Time 2–Time 4) to be
aected by the keyboard location. Based on the TVF envelope times for
the C4 key (center C), positive (+) settings will cause notes higher than
C4 to have increasingly shorter times, and negative (-) settings will cause
them to have increasingly longer times. Larger settings will produce
greater change.
-100–+100
Time
Key
TVF Env Time 1–4
Specify the TVF envelope times (Time 1–Time 4). Higher settings will
lengthen the time until the next cuto frequency level is reached. (For
example, Time 2 is the time over which Level 1 will change to Level 2.)
0–127
TVF Env Level 0–4
Specify the TVF envelope levels (Level 0–Level 4). These settings specify
how the cuto frequency will change at each point, relative to the
standard cuto frequency (the cuto frequency value specied in the TVF
screen).
0–127
Note on
Note o
Time
Cuto
Frequency
T: Time L: Level