EasyManua.ls Logo

Roland juno-ds61 - System Settings; General System Parameters; Sound System Parameters

Roland juno-ds61
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
System Settings
Procedure
1.
Press the [MENU] button.
The MENU screen appears.
2.
Move the cursor to “SYSTEM, and press the [ENTER] button.
3.
Move the cursor to tab, and use the [
K
] [
J
] buttons to switch the pages.
4.
Move the cursor to the parameter that you want to edit, and use the value
dial to change the value.
5.
Press the [EXIT] button to exit the screen.
MEMO
The parameters you edit are saved when you press the [WRITE] button in the
SYSTEM screen, or when you exit the SYSTEM screen.
System Parameters
GENERAL
Parameter Value/Explanation
LCD Contrast
Adjusting the display contrast.
1–20
LCD Brightness
Adjusting the display brightness.
1–20
Auto O
Species whether the unit will turn o automatically after a certain time
has elapsed.
If you don’t want the unit to turn o automatically, choose “OFF” setting.
OFF, 30, 240[min]
Power Save Time
Amount of idle time that is to pass before the JUNO-DS enters power-save
mode.
When the JUNO-DS enters power-save mode, it will reduce its power
consumption by turning o the display backlight and minimizing button
illumination.
OFF, 1, 3, 5, 10, 15, 20, 30, 60[min]
Illumination
Species whether the buttons illuminate when they are waiting for an
operation.
OFF, ON
PAD COLOR
Parameter Value/Explanation
Pad Brightness
Adjusts the brightness of pads [1]–[8].
1–127
COLOR The illumination color of pads [1]–[8] can be specied for each function.
Back Ground
OFF, 1–13
Species the basic illumination color of the pads.
Level Meter
Species the illumination color of the level meter that
indicates the volume when you play the keyboard.
Part Select
1–13
Species the pad illumination color that indicates the
selected part when you use the pads to select a part.
Track Select
Species the pad illumination color that indicates
the selected track when you use the pads to select a
track.
Track Data
Species the pad illumination color that indicates a
track already containing performance data.
Track Mute
Species the pad illumination color that indicates a
muted track.
Rhythm Pattern
Species the pad illumination color when the
RHYTHM PATTERN screen is displayed.
Audio Player
Species the pad illumination color when the AUDIO
PLAYER screen is displayed.
Tone Switch
Species the pad illumination color for pads [5]–
[8] that indicate tones turned on in the PATCH EDIT
screen.
Tone Select
Species the pad illumination color for the pad that
indicates the selected tone in the PATCH EDIT screen.
KEY TOUCH
Parameter Value/Explanation
Velo Curve
Sets the keyboard’s touch.
LIGHT, MEDIUM, HEAVY
Curve Oset
Adjusts the Velo Curve.
Lower values make the keyboard feel lighter.
Higher values make the keyboard feel heavier.
-10–+9
Velocity
Species the velocity transmitted when a key is played.
REAL
The transmitted velocity value will correspond to the
force with which you strike the key.
1–127
The transmitted velocity value will be xed,
regardless of the force with which you strike the key.
SOUND
Parameter Value/Explanation
Master Tune
Adjusts the overall tuning of the JUNO-DS.
The display shows the frequency of the A4 note (center A).
415.3–466.2[Hz]
Master Key Shift
Shifts the JUNO-DS’s overall pitch range in semitone steps.
-24–+24
Master Level
Sets the JUNO-DS’s overall volume.
0–127
Output Gain
Adjusts the output gain from the JUNO-DS’s output.
-12–+12[dB]
Audio Level
Species the volume when playing audio le from the Audio Player.
0–127
MASTER EQ
Parameter Value/Explanation
Master EQ Switch
Turn the master EQ (this is an equalizer that is applied to the overall sound
of the entire JUNO-DS) on/o.
OFF, ON
EQ Low Freq
Frequency of the low range.
200, 400[Hz]
EQ Low Gain
Gain of the low frequency range.
-15–+15[dB]
EQ Mid Freq
Frequency of the middle range.
200–8000[Hz]
EQ Mid Gain
Gain of the middle frequency range.
-15–+15[dB]
EQ Mid Q
Width of the middle frequency range.
Set a higher value for Q to narrow the range to be aected.
0.5, 1.0, 2.0, 4.0, 8.0
EQ High Freq
Frequency of the high range.
2000, 4000, 8000[Hz]
EQ High Gain
Gain of the high frequency range.
-15–+15[dB]
EQ Total Gain
Gain of the overall Master EQ.
-15–+15[dB]

Table of Contents

Related product manuals