Roland juno-ds61 - Editing the Vocoder;Auto Pitch; Vocoder;Auto Pitch Parameters; Saving Vocoder;Auto Pitch Settings

30
Editing the Vocoder/Auto Pitch
1.
Press the [VOCODER/AUTO PITCH] button to make it light.
The VOCODER/AUTO-PITCH screen appears.
2.
Move the cursor to the parameter that you want to edit, and use the value dial to change the value.
3.
To save the edited settings, perform the operation “Saving the Vocoder/Auto Pitch Settings (Write).”
Parameter Value/Explanation
Mode
Selects the vocoder or auto-pitch.
Vocoder, Auto-Pitch
Bank, Number
Selects the vocoder or auto-pitch setting.
PRST 001–010 Vocoder settings
PRST 011–020 Auto-pitch settings
USER 501–520 User settings
Mode: Vocoder
Carrier Selects the sound that will be the basic waveform of the vocoder sound.
Level
Adjusts the output level of the sound that passes through the vocoder.
0–127
Pan
Adjusts the stereo position of the sound that passes through the vocoder.
L64–63R
Mic Sens
Species the input sensitivity of the mic.
0–127
Envelope
Selects the character of the sound.
SHARP Emphasizes the human voice.
SOFT Emphasizes the sound of the instrument.
LONG Produces a vintage sound with a long decay.
Synth Level
Species the input level of the instrumental sound.
0–127
Mic Mix Level
Species the amount of the mic audio passing through the Mic HPF (Mic
High Pass Filter) that is added to the output of the vocoder.
0–127
Mic HPF
Species the frequency at which the high pass lter (HPF) applied to the
mic audio starts to take eect. If this is set to “BYPASS,” no lter is applied.
BYPASS, 1000–16000Hz
Mode: Auto-Pitch
Keyboard Part Selects the sound that is played on the keyboard when using Auto-Pitch.
Type
Selects how Auto-Pitch correction is performed.
SOFT Corrects the pitch smoothly.
HARD Corrects the pitch quickly.
ELECTRIC1 Corrects the pitch in a stepwise manner.
ELECTRIC2
Corrects the pitch more strongly than ELECTRIC1.
This reproduces the mechanical, step-wise pitch
correction used in pop music.
ROBOT Corrects the pitch to the specied note.
Level
Adjusts the output level of the sound that passes through the auto-pitch.
0–127
Pan
Adjusts the stereo position of the sound that passes through auto-pitch.
L64–63R
Scale
Selects the scale to which Auto-Pitch corrects the pitch.
CHROMATIC Corrects the pitch in semitone steps.
Maj (Min)
Corrects the pitch to the notes of the scale (Key)
you specify.
Key
If the Scale parameter is set to “Maj (Min),” specify the key of the song
you’re singing. For example if the song is in C major, specify “C”; if the song
is in A minor, specify “Am.”
C–Bm
Relationship between the key of the song and the key signature (and) of
the score
Major keys
Major keys
Minor keys
Minor keys
Octave
Makes the pitch one octave higher/lower.
-1, 0, +1
Gender
Settings in the “-” direction give the voice an increasingly masculine
character; settings in the “+” direction give the voice an increasingly
feminine character.
-10–+10
Balance
Species the volume balance between the direct sound (D) and the eect
sound (W).
D100:0W–D0:100W
Note
Fixes the pitch.
* Available if Type is set to “Robot.”
C–B
Saving the Vocoder/Auto Pitch Settings (Write)
1.
Press the [WRITE] button to make it light.
The VOCODER/AUTO-PITCH NAME screen appears.
2.
Assign a name to the data that you’re saving.
Operation Explanation
[
K
] [
J
] buttons Move the cursor.
Value dial, [–] [+] buttons Select the character.
[
I
] [
H
] buttons Switch between uppercase and lowercase.
Inserting/ Deleting Characters
1.
While entering a name, press the [MENU] button.
The NAME MENU window appears. The window closes if you press the button
once again.
2.
Move the cursor to “INSERT” or “DELETE,” and press the [ENTER] button.
Function Explanation
INSERT Press the [ENTER] button to insert a space (blank) at the cursor location.
DELETE
Press the [ENTER] button to delete the character at the cursor location;
subsequent characters will be moved forward to ll the gap.
3.
When you’ve specied the name, press the [ENTER] button.
4.
Use the value dial to specify the save-destination.
5.
Press the [ENTER] button.
A conrmation message appears.
If you decide to cancel, press the [EXIT] button.
6.
Move the cursor to “OK,” and press the [ENTER] button.
Saving is complete when the screen indicates “Completed!”
NOTE
Never turn o the power while the screen indicates “Writing....”