Roland M-5000 - Touch Controls, Screen Navigation, and Configuration

Overview of Operations
47
Basic Touch Operations
The following four operations are used when working with the
touch display.
Tap
Using your ngertip, you press and release an on-screen button,
area, or other item.
Double-tap
You make two taps in rapid succession.
Long tap
You touch and hold your ngertip to the touch display for a specic
interval before release.
Slide
You drag your ngertip across the touch display while pressing and
holding it against a target item.
Using Templates to Select a Mixer
Conguration
The conguration of the mixing engine in the M-5000 can be
changed as you like to suit the desired purpose. This section
describes selecting a mixer conguration from templates.
1. Press the [MENU] button.
2. Tap <SETUP>, then tap <MIXER CONFIGURATION>.
The MIXER CONFIGURATION window appears.
3. Tap <TEMPLATE>.
The TEMPLATE popover appears.
4. Tap <DEFAULT>.
Starting point templates for the mixer congurations are available.
The Default conguration has the following:
5 INPUT CHANNEL (MONO): 64
5 INPUT CHANNEL (STEREO): 4
5 MAIN: LCR
5 AUX: 24
5 MATRIX: 8
5 MONITOR 1 (STEREO)
5 TALKBACK
5 OSC 1+OSC 2
5 HEADPHONES (STEREO)
5 (The remains of channel strips: 14)
5. Turn on the <STEREO> button for any input channel or
output bus you want to make stereo.
6. Tap <OK>.