EasyManua.ls Logo

Roland M-5000 - Appendix and Specifications; Main Technical Specifications

Roland M-5000
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
62
Appendix
Main specications
Roland M-5000: LIVE MIXING CONSOLE
Processing
Mixing Structure
Up to 128 Audio Paths (combination of INPUT CHANNEL, MAIN,
SUBGROUP, AUX, MIX-MINUS, MATRIX, MONITOR, COMM, OSC,
HEADPHONES)
Inputs
Max 300 (96 kHz), Max 460 (48 kHz / 44.1 kHz)
CONSOLE: 16
AES/EBU: 4
REAC: 40 x 2
EXPANSION SLOT: 80 x 2 (96 kHz), 160 x 2 (48 kHz / 44.1 kHz)
USB AUDIO: 16
DOCK: 2
USB RECORDER: 2
FX 1L-8R: 16
TALKBACK: 2
OSC: 2
Outputs
Max 296 (96 kHz), Max 456 (48 kHz / 44.1 kHz)
CONSOLE: 16
AES/EBU: 4
REAC: 40 x 2
EXPANSION SLOT: 80 x 2 (96 kHz), 160 x 2 (48 kHz / 44.1 kHz)
USB AUDIO: 16
DOCK: 2
USB RECORDER: 2
FX 1L-8R: 16
Internal Processing
72 bits (xed point, bus summing)
Signal Processing
AD/DA Conversion: 24 bit
Sampling Rate: 96 kHz, 48 kHz, or 44.1 kHz
Connectors
INPUT jacks (1 16): XLR-3-31 type (balanced, phantom power)
TALKBACK MIC 2 jack: XLR-3-31 type (balanced, phantom power)
AES/EBU IN jacks (1/2, 3/4): XLR-3-31 type (balanced)
OUTPUT jacks (1 16): XLR-3-32 type (balanced)
PHONES 1 jack: Stereo 1/4 inch phone type
PHONES 2 jack: Stereo miniature phone type
AES/EBU OUT jacks (1/2, 3/4): XLR-3-32 type
REAC ports (A, B, SPLIT/BACKUP): RJ-45 EtherCon type, REAC SPLIT/
BACKUP port supports REAC EMBEDDED POWER.
WORD CLOCK connector (IN, OUT): BNC type
RS-232C connector: DB-9 type
MIDI connector (OUT/THRU, IN)
USB port (MEMORY): USB type A
USB WLAN ADAPTOR port: USB type A
USB COMPUTER port: USB type B
LAN port: RJ45 type
DOCK CABLE port: 10-pin mini DIN type
GP I/O port: DB-25 type
FOOT SWITCH jacks (1, 2): 1/4-inch TRS phone type
LAMP jacks: XLR-4-31 type x 2, LAMP power: DC +12 V/500 mA
EXT.POWER DC IN jack: XLR-4-32 type
* XLR type: 1 GND, 2 HOT, 3 COLD
* Phantom power: DC +48 V (unloaded maximum), 14 mA
(maximum load) (All XLR type inputs)
Input/Output Characteristics
Input Impedance
INPUT jacks (1 16): 7 k ohms
TALKBACK MIC 2 jack: 4 k ohms (Phantom: ON)
Nominal Input Level (Variable, typ.)
INPUT jacks (1 16): -65 to -10 dBu (Pad: OFF), -45 to +10 dBu (Pad:
ON)
TALKBACK MIC 2 jack: -50 to -10 dBu
Non Clip Maximum Input level (1 kHz, typ.)
INPUT jacks (1 16): +8 dBu (Pad: OFF), +28 dBu (Pad: ON)
TALKBACK MIC 2 jack: +8 dBu
Output Impedance (typ.)
OUTPUT jacks (1 16): 600 ohms
PHONES jacks (1, 2): 45 ohms
Recommended Load Impedance
OUTPUT jacks (1 16): 10 k ohms or greater
PHONES jacks (1, 2): 32 ohms or greater
Minimum Load Impedance
PHONES jacks (1, 2): 16 ohms
Nominal Output Level (ty.)
OUTPUT jacks (1 16): +4 dBu (Load impedance: 10 k ohms)
Non Clip Maximum Output level (1 kHz, typ.)
OUTPUT jacks (1 16): +22 dBu (10 k ohms load)
PHONES jacks (1, 2): 500 mW + 500 mW (40 ohms load)
Other
Display
Graphic color LCD 800 x 600 dots (touch screen)
Graphic organic light emitting display 256 x 64 dots (Fader Bank
Display x 7, User Assignable Display x 1)
Power Consumption
180 W
Dimensions
934 (W) x 725 (D) x 346 (H) mm
36-13/16 (W) x 28-9/16 (D) x 13-5/8 (H) inches
Weight
36 kg
79 lbs 6 oz
Operation Temperature
+5 to +40 degrees Celsius
+41 to +104 degrees Fahrenheit

Table of Contents

Other manuals for Roland M-5000

Related product manuals