Need help?Do you have a question about the Roland monoFab SRM-20 and is the answer not in the manual?
Critical safety and operational guidelines for using the machine correctly and safely.
Overview of the SRM-20's capabilities, parts, and the VPanel operation interface.
Details on cutting tools, materials, scrap boards, and the cutting area specifications.
Guides for using SRP Player and MODELA Player 4 for creating cutting files.
Steps for preparing the machine, attaching tools, setting origins, and performing the cutting process.
Configuration and interpretation details for using NC code commands with the machine.
Guidelines for cleaning, part replacement, and general machine upkeep.
Troubleshooting common error messages and operational issues encountered with the machine.
Summary of key operational and physical specifications for the SRM-20.
General| Model | SRM-20 |
|---|---|
| Drive System | Stepper Motor |
| Spindle Speed | 3, 000 - 7, 000 rpm |
| Interface | USB |
| Working Area | 203.2 mm (X) × 152.4 mm (Y) × 60.5 mm (Z) |
| Loadable Workpiece Weight | 2 kg |
| Mechanical Resolution | 0.01 mm |
| Power Supply | AC 100-240 V |
| Supported Materials | Modeling wax, chemical wood, acrylic, ABS |
To Next Page
