Roland R-8M User Manual

©FEEL
FUNCTION
If the internal memoiy protect is on, the following display will appear. Press
|
ENTER]
once again to
temporarily turn off
the
memory
protect
and
write
the data.
=+=+
PROTECT OH
*+
Turn off
once?
'
While
pressing
|
JUMP
|,
press
! EXIT
|
to return to the Play mode (the indicator will go out).
I
Feel
Patch exchange procedure
This function exchanges
(swaps)
Feel Patch settings between the temporaty area
and
the
memory area.
By repeated exchanges, you can rearrange the order
of Feel
Patch settings.
By
exchanging
a modified
Feel Patch with the same Feel Patch number, you
can compare
the edited
and
unedited
settings.
Temporary area
Exchange
Memory area
|
Internal
RAM card
Feel Patch
Feel Patch
[•
Feel Patch
C-01
J
1-01
, ,
I
*When exchanging RAM card Feel Patches, turn the
protect switch
off after inserting the
RAM card.
CD
Move to the Feel Patch exchange display.
Press
|EDlTJ
(the indicator
will
light).
Use the
CURSOR
HJlMto
select "FEEL" and press
|
ENTER |.
Use the
CURSOR
HE
to select "WRT"
and press
I
ENTER
|
.
Use the
CURSOR
r^lFFI
to select
"EXCHG" and press
!
ENTER
|
.
FEEL.-'UIRT.^EXCHG
TMP
*-^
F:
1-01?
^
Feel Patch number
Use the
CURSOR
H
[|
j
to select
the Feel Patch
number
you
wish
to exchange.
I-01--M6 (internal Feel Patches),
C-01—
C-16
(RAM card
Feel Patches)
Va'
Press
I
ENTER
|
and you will
be asked "Are you sure?".
vs)
Press
I
ENTER
j
once again and the data will be exchanged.
To quit
without
writing press
|
EXIT |.
If the internal memory protect is on, the
following
display
will
appear. Press
|
ENTER
|
once again
to
temporarily turn off the memory protect and exchange the data.
**
PROTECT ON
**
Turn off once?
'
While pressing
[JUMP
I,
press
|
EXIT
I
to return to the Play mode (the indicator will go
out).
52

Roland R-8M Specifications

General

Brand	Roland
Model	R-8M
Category	Recording Equipment
Language	English