[3]
SETUP
These settings for MIDI, memory protect and program
change map. affect the entire
system of the
R
-
8M.
* Setup settings are preserved
even when the power is
turned off.
MIDI settings
These
MIDI settings affect the entire
system.
•Control channel
:
1
—
16
SETUP^^MIDI
Control Uh
-
16
This function detennines the channel
on which program
change message (to
select Patches
or Feel Patches) will
be
received.
The control
channel is also used
as the basic channel
on
which exclusive
message is received
and transmitted
(o-
see page
63).
•Program change
switch :
ON, OFF
This
switch
determines whether
or not program change
message will be received.
SETUP.-'MIDI
P'SF'i Change CiN
•Exclusive
switch :
ON, OFF
SETUP.--MIDI
sysEx
=
ON
Volume
switch :
ON, OFF
SETUP-'MIDI
Uolur-ie
=
ON
This switch
determines whether
or not exclusive
message will be received.
*
If memory protect
(
a-
see
page
56)
Is on, exclusive
message will
not affect the
settings in
the memory area
even if the
exclusive switch is ON.
This switch
determines whether
or not volume
message (control
number
7)
will be received.
I
Bender
switch :
ON, OFF
SETUP.--riIDI
Pitch Bender-
ON
This switch determines whether
or not
pitch bender
message will be received.
(Pan switch :
ON, OFF
SETUP.-'MIDI
PanFot
=OFF
This switch
determines whether
or not
pan message (control
number
10)
will be received.
*
If the pan switch is
turned
ON, the pan setting
specified by the control
number
in
the Instrument
Section
will be ignored
(crsee
page
33).
Hold switch :
ON, OFF
SETUP.--MIDI
Hold
=
ON
This switch
determines whether
or not
hold messages (control
number
64)
will
be
received
or not. Normally,
"hold" messages
cany
a
data value
of on/off, but
by using a MIDI devices
that
can transmit a continuous
value,
you can control instrument
decay.
*
Some
sequencers will
handle only
on/off data for "hold" messages.
In such cases,
decay
changing can not
be recorded.
55
To Next Page
Loading...
Need help?
General
