Roland R-8M User Manual

(USETUP
Velocity
switch (note
off) : ON, OFF
This
switch
determines
whether
or not note off
velocity will be received. This will
be
effective when using
the
R-8M
with
MIDI
devices that are able to transmit note
off
velocity. As the
note off velocity value
is higher,
the decay time will become shorter.
SETUP^-'MIDI
Off
Ueloc.ity=OFF
*For instruments which receive note off velocity, set the
Note Off
switch on (see
page
30, 38).
[SETTING
PROCEDURE]
Q)
Move
to the
MIDI (setup) setting display.
Press [edit"!
(the indicator
will
light).
Use the
CURSOR
Rlf^l
to select "SETUP" and press
|
ENTER
|
.
Use
the
CURSOR
[T|H
to select "MIDI" and press
!
ENTERI
SETUP^MIDI
Cofitrol
Ch =16
'
Use the
CURSORHH
to select the parameter, and use VALUE[X][^
to modify the
setting.
'
While pressing [JUMPi,
press
|
EXIT
|to return to the Play mode
(the indicator will
go out).
I
How to
turn memory protect
on/off
The memory protect
function is a protective measure to
prevent
you from
accidentally rewriting the
Patch or Feel Patch
senings in the internal memory area. Normally you
will leave memory protect
on,
but when storing Patch
or Feel Patch settings into the internal memory area, you
must turn
this
memory
protect off.
Normally you will temporarily
turn memory protect off during
the write
procedure.
However,
if you
will
be repeating
the write procedure many
times, you can turn mcmoiy protect off beforehand to
avoid this extra step.
Q)
Move to the
memory protect setting display.
Press
I
EDIT
|
(the indicator
will light).
Use the CURSOR
[^[l
to select "SETUP"
and press
|
ENTER
|
.
Use the
CURSOR
HH"
"'«' "PROTECT"
and press
!
ENTERI
-
SETUP-'PROTECT
Meri Prot-ect
=
ON
®
Use
VALUE
fAlfv]
to
turn memory protect
ON/OFF.
'
While pressing
!
JUMP!
,
press
!
EXIT
|
to return to
the Play mode (the Indicator will go out).
56

Roland R-8M Specifications

General

Brand	Roland
Model	R-8M
Category	Recording Equipment
Language	English