[J]
USING A
RAM CARD
I
Data
that can be
stored in
a
RAM card
Roiand
MEMORY CARD
A Ram
card (M-256E) can store the
following
settings.
32 Patches
16 Feel
Patches
Setup data (MIDI, program change map)
If you
leave
a RAM
card inserted while playing the
R
-
8M, you
will
be able
to instantly select the
card
Patches
or
Feel Patches in the same way as internal settings. It is also possible
to write
modified
settings from the
temporary area directly into
a RAM
card.
However,
if you
wish
to use setup data
from a card,
you must use the Load operation to copy the setup data from
the
RAM card
into
internal
memoty.
*
M-SSeO
RAM cards can be used.
Precautions when using
a
RAM card
• Use only the specified type of RAM card
(M-256E).
•When using a new RAM card for the
first
time,
install the included lithium battery into
the card. Use the Save procedure to copy the
internal data into the RAM card before
using it.
•RAM cards have a protect switch
that protects the stored data. Normally you will leave
this on, but turn it off before saving data
to the RAM card.
On Off
A
PflOTECT
•Do not turn the
power off or remove the card
while
saving or loading data from a
RAM card. Doing so
could damage the data
in the
RAM card or internal memory.
60
To Next Page
Loading...
