Roland R-8M - Saving Data to RAM Card

SlUSING A RAM
CARD
[Saving
data from the
R-8M
to a RAM
card
This SAVE operation
copies all internal data
(32
Patches,
16 Feel Patches, and
setup data)
from the
R-8M into a RAM card. When
using a new
RAM card
or a RAM card which
has been used
by
another device, use this Save
operation first.
®
Insert the RAM card firmly
into the RAM
CARD slot, and
set the RAM card protect
switch
off.
'
Move to
the save display.
Press
I
EDIT
|
(the indicator
will light).
Use the
CURSOR
Rlf^l
to select
"UTIL" and press
i
ENTER
|
.
Use the
CURSOR
[^[l
to select
"RAMCARD"
and press
!
ENTER"
Use the
CURSOR [^[j'o select "SAVE"
and press
! ENTERT
UTIL^-'RfiM.--SfiUE
Press
ENTER.
Press
I
ENTER
|
and you will be
asked "Are you sure?".
®
Press
ENTER and
the
data will be
saved.
I
To quit without saving
press!
EXIT
I-
If the RAM
card is
new
or if it
has been used
by another device,
the following
display will
appear.
Press
[enter]
once again.
To quit without
saving press!
EXITT
UTI
L.--RflM.--SflUE
For-Piat.?
Turn
the protect
switch
of the RAM card
on again.
'
While pressing
[JUMP!
,
press
!
EXIT
|
to return
to the
Play mode
(the indicator
will go
out).
61