77
Panel descriptions
8
INPUT jacks (MIC, LINE)
You can connect a mic or external audio device, and use the mic
to sing while you perform, or perform along with a song that plays
back from your external audio device
Jack Explanation
MIC Connect a mic (sold separately) to this jack.
LINE
This is an audio input jack. You can connect your audio
player or other audio source here.
MEMO
¹ Use the LEVEL [MIC/LINE IN] knob to adjust the volume.
¹ The RD-08 supports dynamic mics. Condenser mics are not
supported.
¹ You can apply EQ and reverb to the input audio. Hold down
the [SHIFT] button and SONG/METRONOME [SELECT] (MIC/
LINE SETTING) button to access the setting screen. You can also
access the same screen via [MENU] Ó [INPUT SETTING]. For
details on the parameters that can be set, refer to “Parameter
Guide” (PDF).
OUTPUT jacks (L/MONO, R)
These are connected to an amp or other device. For mono output,
use the L/MONO jack.
PHONES jack
You can connect a set of headphones here.
To Next Page
Loading...
Need help?
General
