Roland RD-500 - Page 28

Vibrato
L me 1 b This function controls the depth of the vibrato effect.
Bend Up .
hb U Pp This creates the same effect as obtained by moving the
bender lever to the right.
Bend Down :
b d n This creates the same effect as obtained by moving the
bender lever to the left.
Mute 1
f b | Pressing the pedal will turn on the mute function.
Mute 2
If you play the keyboard hard while holding the pedal down,
the mute function will be turned on.
Mee
Program Up
P Gb U This increases the Setup Memory number by one.
Program Down
ad uy Cc This decreases the Setup Memory number by one.
Off
oO F F No controlling is done.
SREREF
* The functions that can be assigned to the C1 slider are Volume, Pan, Tremolo Depth, Expression,
Vibrato and Off.
m On/Off of the Controllers
You can select whether or not to control the Pitch/Modulation or Damper effect with the bender lever
or the pedal switch connected to the DAMPER PEDAL Jack on the rear of the unit separately for each
art.
mo]
@ Bender Switch
This selects whether to control (ON) or not to contro! (OFF) the pitch with the bender. When it is set
to OFF, the pitch cannot be changed by using the bender lever.
@ Modulation Switch
This selects whether to control (ON) or not to control (OFF) the modulation depth using the bender.
When it is set to OFF, the modulation effect will not be affected by the bender lever.
Damper Switch
This selects whether to control (ON) or not to control (OFF) the damper effect using the pedal switch
connected to the DAMPER PEDAL Jack.
Boo Bese
ARCH
: = pee KEY TOUCH EICATOR -
: : AE, te ; ee one aes
: A LEVEL VARIATION AHODEB EPIANO ak ORGAN
nl a YJ GISIoo
FUNC: TRANSPOSE bec NC REVERS : rr >
1. Turn to the Function mode.
28