Roland RD-600 - Screen Display and Tone Selection; Selecting Tones for TX Parts

i a aaa a
The Groups / Categories / Variations of the RD-600 correspond to program numbers as follows.
Ali 1 Ai2 2 A133 Ai4 4 A1i5 5 Ai6 6 A177 Aig 8
A2i 9 A22 10 A23 11 A24 12 A25 13 A26 14 A27 15 A28 16
A31 17 A32 18 A33 19 A34 20 A35 21 A36 22 A37 23 A38 24
A41 25 A42 26 A43 27 A44 28 A45 29 A46 30 A47 31 A48 32
A5S1 33 A5S2 34 A53 35 A54 36 A55 37 A56 38 AS7 39 A58 40
A61 41 A62 42 A63 43 A64 44 A65 45 A66 46 A67 47 A68 48
A71i 49 A72 50 A73 51 A74 52 A75 53 A76 54 A77 55 A78 56
B31 81 B32 82 B33 83 B34 84 B35 85 B36 86 B37 87 B38 88
B4i 89 B42 90 B43 91 B44 92 B45 93 B46 94 B47 95 B48 96
B51 97 B52 98 B53 99 B54 100 B55 101 B56 102 B57 103 B58 104
B61 105 B62 106 B63 107 B64 108 B65 109 B66 110 B67 111 B68 112
B71 113 B72 114 B73 115 B74 116 B75 117 B76 118 B77 119 B78 120
B81 121 B82 122 B83 123 Ba4 124 B85 125 B86 126 B87 127 B88 128
The screen display
When you use the part select buttons to select the TX UPPER / LOWER part, the display
shown below will appear.
The Tone selected for the TX UPPER part will be displayed in the upper line, and the Tone
selected for the TX LOWER part will be displayed in the lower line.
ALilCOFF] OFF-OFF-+—- TX UPPER PART
ALiCOFrF] OFF-OFF-- TX LOWER PART
Bank Select LSB
Bank Select MSB
Proguram Number
Selecting a Tone
Here’s how to select the Group / Category / Variation that corresponds to the program num-
@
ber of the desired Tone.
GROUP
A rSETUP. 8B
PART SELE!>
LOWER ~{MGiI— UPPER LO’ a -aEa— Ul PER
rae fi Wad 9 Beall
INTERNAL TONE CATEGORY
PIANO 1 PIANO 2 E.PIANO ORGAN STRINGS PAD BASS/LEAD CLAV/ MALLET |
Td Oe lf ea ea ll
==)
DEMO
<a PAGE &
3 4 5 6 7 8
INTERNAL TONE VARIATION
ce SS ee |
1. Press either the TX UPPER or LOWER part select button to make the indicator light for the part
to which the external MIDI device Tone will be assigned. If you select the TX UPPER part, the
indicators of the part select and Group/ Category / Variation buttons will light red. If you select
the TX LOWER part, the indicators of the part select and Group/Category/ Variation buttons
will light green.
DEC/NO INC/YES
2. Press the Group/ Category / Variation buttons.
The program number in the [ ] of the display will change, and a program change message will
be transmitted from MIDI OUT. Make sure that the selected Group/Category / Variation and
the program number are shown in the display.
25