Roland RD-600 - Error Message Reference; Power-On, Memory, and MIDI Error Messages

Error message list
If
an
operation
was
incorrect
or
could
not
be
executed
correctly,
an
error
message
will
appear
in
the
display.
Make
a
note
of
the
error
message
and
take
the
appropriate
action.
Messages
which
appear
when
the
power
is
turned
on
Battery Low!
Cause: The internal backup battery has run down.
Action: Contact a nearby Roland service center.
Battery None!
Cause: The internal backup battery is missing.
Action: Contact a nearby Roland service center.
Memory-related messages
Memory Damaged!
Cause: Memory data could not be read correctly.
Action: Contact a nearby Roland service center.
MIDI-related messages
MIDI Rx Error!
Cause: It is possible that a MIDI cable has been disconnected or broken.
Action: Check the MIDI cables.
MIDI Buff. Full!
Cause: More data was received ina short time than the RD-600 was able to process.
Action: On the transmitting device, reduce the amount of MIDI data being transmitted.
Rx Data Error!
Cause: Exclusive data that was received was incorrect.
Action: If the same message appears repeatedly, there is a problem with the contents of the
MIDI data. Check the MIDI data that is being transmitted.
Check Sum Error!
Cause: The exclusive data that was received has an incorrect check sum.
Action 1: Check the check sum of the data that is being transmitted. If it is incorrect, correct it
and re-transmit the data.
If the check sum of the transmitted data is correct, try the following measures.
Action 2: Using as short a MIDI cable as possible, transmit the data once again.
Action 3: If another MIDI device (such as a device with a MIDI Thru function) is connected
between the transmitting device and the RD-600, disconnect that device and use a
MIDI cable to connect the transmitting device directly to the RD-600, and transmit
the data once again.
If the same message still appears, contact a nearby Roland service center or your dealer.
62