Roland RD-600 - Rear Panel Connectors

Rear Panel
Damper pedal jack
The included pedal switch (DP-6) can be
connected here and used as a damper pedal.
This switches on or off
the unit.
POWER switch
connected here.
a connected expression pedal.
Connect a power cord
FC1/FC2 jacks
ta this socket.
AC inlet
Headphone jack
A set of headphones can be connected here. Audio signals
will still be output from the OUTPUT and FIXED OUTPUT
jacks even if headphones are connected.
PHONES
O°
BALANCE i
CTApp- ne Hor
io IS COL
SLEEVE GND
A keyboard amp or power amp etc. can be connected here.
If you connect only the L jack, the output will be monaural.
These jacks also provide balanced output.
Output jacks (R/L (MONO))
The volume slider or equalizer of the RD-600 does
not affect the output from these jacks.
A mixer can be connected to these jacks to allow
more accurate mixing.
These jacks also provide balanced output.
Output jacks (FIXED R/L (MONO))
An optional expression pedal (EV-5) can be
Various parameters or functions can be assigned to
These are used for connecting
other MIDI devices.
MIDI connectors