147
Adding Effects
Overview Connections VS-700C Console VS-700R I/O Fantom VS Appendix
MFX1–3 Output
(Multi-Effects 1–3 Output)
MFX Output Level
(Multi-Effects Output Level)
Adjusts the volume of the sound that has passed through the
multi-effects.
Value:
0–127
MFX Chorus Send Level
(Multi-Effects Chorus Send Level)
Adjusts the amount of chorus for the sound that passes
through multi-effects. If you don’t want to add the Chorus
effect, set it to “0.”
Value:
0–127
MFX Reverb Send Level
(Multi-Effects Reverb Send Level)
Adjusts the amount of reverb for the sound that passes
through multi-effects. If you don’t want to add the Reverb
effect, set it to “0.”
Value:
0–127
Chorus
Chorus Type
Selects either chorus or delay.
Value
0 (Off):
Neither chorus or delay is used.
1 (Chorus):
Chorus is used.
2 (Delay):
Delay is used.
3 (GM2 Chorus):
General MIDI 2 chorus
Chorus Output
Chorus Output Level
Adjusts the volume of the sound that has passed through
chorus.
Value:
0–127
Chorus Output Select
Specifies how the sound routed through chorus will be
output.
Value
MAIN:
Output to the OUTPUT jacks in stereo.
REV:
Output to reverb in mono.
M+R:
Output to the OUTPUT jacks in stereo, and to
reverb in mono.
Reverb
Reverb Type
Selects the type of reverb.
Value
0 (Off):
Reverb is not used.
1 (Reverb):
Normal reverb
2 (SRV Room):
This reverb simulates typical room
acoustic reflections.
3 (SRV Hall):
This reverb simulates typical concert hall
acoustic reflections.
4 (SRV Plate):
This reverb simulates a reverb plate, a
popular type of artificial reverb unit that
derives its sound from the vibration of a
metallic plate. You can also achieve
unusual metallic-sounding reverbs using
“SRV Plate.”
5 (GM2 Reverb):
General MIDI 2 reverb
7
8
9
10
11
12
13
VS-700_r_e.book 147 ページ ２００８年１１月２０日 木曜日 午後２時２８分
To Next Page
Loading...
