Roland Sonar V-Studio VS-700 - Connecting an EDIROL DV-7 DL (Video Control); Connecting the EDIROL DV-7 DL and VS-700 C; To Enable Video Control

168
Connecting an EDIROL DV-7DL (Video Control)
The VS-700C’s following controllers can be linked with an EDIROL video editing system such as the EDIROL DV-7DL.
• Audio channels 5–8 and the master fader
• Transport
• Jog/shuttle wheel
• T-bar
• Record/Edit tool section
fig.38.eps
Use a USB cable to connect the EDIROL DV-7DL’s rear panel USB connector to the VS-700C’s rear panel USB
connector.
In the VS-700C’s T-bar section, press the [VIDEO CTRL] button.
SONAR’s video functionality will not be controlled in VIDEO CTRL mode.
Only the EDIROL video editing system is supported.
Connecting the EDIROL DV-7DL and VS-700C
To Enable Video Control
VS-700_r_e.book 168 ページ ２００８年１１月２０日 木曜日 午後２時２８分