24
Panel Descriptions
fig.panel-vs-700r-side.eps
A. Rackmount Brackets
If you want to install the system in a 19” rack, attach the included rackmount brackets.
➔
“Attaching the Rackmount Brackets”
(p. 163)
B. Cooling Fan Intake Vent
C. Cooling Fan Exhaust Vent
The VS-700R contains a cooling fan that prevents internal overheating. External air is drawn in through the intake
vent, then is expelled from the exhaust vent, while carrying along with it the heat that has accumulated inside the
unit.
Do not block the cooling fan intake vent or exhaust vent. Doing so will cause the internal temperature to rise,
possibly causing heat-related malfunctions.
If you install the system in a 19" rack, you must leave at least 1 cm of space outside the intake vent and exhaust
vent.
Side Panel
AABC
VS-700_r_e.book 24 ページ ２００８年１１月２０日 木曜日 午後２時２８分
To Next Page
Loading...
