169
Overview Connections VS-700C Console VS-700R I/O Fantom VS Appendix
About V-LINK
What is V-LINK?
V-LINK (
) is a function that allows music and images to be performed together. By using MIDI to
connect two or more V-LINK compatible devices, you can easily enjoy performing a wide range of visual effects that
are linked to the expressive elements of a music performance.
For example, if you use the VS-700 in conjunction with the EDIROL P-10, you’ll be able to do the following.
• Using the various controllers of the VS-700C console, you can control the EDIROL P-10 and perform image switching.
• In SONAR, you’ll be able to record and play back V-LINK data.
In order to use V-LINK between the VS-700 and the EDIROL P-10, you’ll need to make connections using a
MIDI cable (sold separately).
Connection Examples
As an example, we will use a setup in which the VS-700 is connected to the EDIROL P-10. Use a MIDI cable to connect
the VS-700R’s MIDI OUT connector to the MIDI IN connector of the EDIROL P-10.
To prevent malfunction or speaker damage, minimize the volume on all your equipment and turn off the
power before you make connections.
fig.connection-V-LINK-e.eps_50
MIDI cable (sold separately)
MIDI OUT
MIDI IN
EDIROL P-10 (sold separately)
VS-700R Rear Panel
USB cable (included)
Dedicated connection
cable (included)
VS-700C
VS-700_r_e.book 169 ページ ２００８年１１月２０日 木曜日 午後２時２８分
To Next Page
Loading...
