11
SYSTEM Parameters / UTILITY Menu
GENERAL
Parameter Value Explanation
LCD Contrast
1–10 Adjusts the contrast of the display.
LCD Bright
1–10
Adjusts the brightness of the display’s
backlight.
KnobMode
DIRECT, CATCH
DIRECT: Control data corresponding to
the knob’s position is always output when
you move a knob.
CATCH: Control data is output only after
the knob passes through the parameter’s
current value.
ManualMode
OFF, LVL
OFF: The sound is heard according to the
settings of the kit.
LVL: The sound is heard at the volume of
the level fader positions. Otherwise, the
settings of the kit are used.
Ptn Lock
OFF, ON
Turn this ON if you want the saved pattern
to be loaded when you reselect the
pattern.
Start Ptn
LAST, 1-01–8-16
Specifies the pattern that is selected at
start-up.
If this is set to LAST, the last-selected
pattern is selected at start-up.
Start Kit
LAST, 001–128
Specifies the pattern that is selected at
start-up.
If this is set to LAST, the last-selected
pattern is selected at start-up.
* If KitSel is set to PTN, and a pattern
whose PTN SETTING parameter KIT Sw is
ON is specified as the Start Ptn, the Start
Kit setting is ignored.
TempoSrc
PTN, SYSTEM
PTN: Use the tempo specified by each
pattern.
SYSTEM: Always use the tempo specified
by the [TEMPO] knob.
Shuffle
PTN, SYSTEM
PTN: Use the shuffle setting specified by
each pattern.
SYSTEM: Always use the shuffle setting
specified by the [SHUFFLE] knob.
KitSel
KIT, PTN
KIT: Switching patterns does not change
the kit.
PTN: When you switch patterns, the
kit specified by the PTN SETTING Kit
parameter is selected.
M.Trig
MOMENTARY,
LATCH
Selects the operation of the AUTO FILL IN
[MANUAL TRIG] button.
MOMENTARY: The fill-in plays only
while you hold down the [MANUAL TRIG]
button.
LATCH: If you press the [MANUAL TRIG]
button during the first half of the pattern,
the fill-in is inserted immediately. If you
press the [MANUAL TRIG] button during
the last half of the pattern, the fill-in is
inserted after waiting for the beginning of
the pattern.
Weak Beat
wSHIFT, PAD
Selects how weak beats are entered
during TR-REC.
wSHIFT: Hold down the [SHIFT] button
and press a pad [1]–[16].
PAD: Each time you press a pad [1]–[16],
the setting cycles between strong
0
weak
0
off.
Parameter Value Explanation
Auto Save
OFF, ON
Specifies how patterns, kits, and system
settings are saved.
OFF: Saved when you execute the WRITE
operation.
ON: Automatically saved when you turn
the [POWER] switch OFF.
* If Ptn Lock (Pattern Lock) is ON, changes
to the pattern are discarded; only
changes to the kit and the system
settings are automatically saved.
USB Volume
OFF, ON
Specifies whether the [VOLUME] knob will
adjust
(on)
or will not adjust
(off)
the volume
of “USB IN MIX.” If this is off, the MIX
channel volume of USB IN is fixed.
RELOAD
Function Explanation
Pattern
Reloads the saved pattern.
Kit
Reloads the saved kit.
Inst
Reloads the saved instrument.
SAMPLE
Function Explanation
Import
Loads an audio file from the SD card into the TR-6S
(import)
.
Delete
Deletes a loaded
(imported)
user sample.
Category
Name
Specifies a name
(maximum 16 characters)
for each category USER
01–32.
Optimize
Shows and reorganizes the available space in the user sample
area of the TR-6S.
LED
Parameter Value Explanation
Bright
1–10
Specifies the LED brightness for the sliders
and buttons.
Glow
1–10
Specifies the brightness of a dimly lit
button LED.
Slider
KIT, SYSTEM
Specify the color of each level fader.
KIT: Lit in the color specified by each kit.
SYSTEM: Lit in the color specified by LED
Slider Color.
Slider Color:
BD/SD/LT/HC/
CH/OH
RED, ORANGE,
YELLOW, LIME,
GREEN, SKYBLUE,
LIGHTBLUE,
BLUE, PURPLE,
MAGENTA, PINK,
WHITE
Specifies the color of each BD–OH level
fader when LED Slider is set to SYSTEM.
Demo
OFF, 1min–
10min
Specifies the time
(minutes)
until the LED
demo is shown.
To Next Page
Loading...
