EasyManua.ls Logo

Roland V-Accordion FR-18 diatonic - Changing the Configuration of the Keyboards (Tablature); Selecting a Tablature with Its Original Key; Saving Your Preferred Tablature

Roland V-Accordion FR-18 diatonic
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Changing the configuration of the keyboards (Tablature)
V-Accordion FR-18 diatonic
r
33
Changing the configuration of the
keyboards (Tablature)
A diatonic accordion plays different notes depending on
whether the bellows is pushed or pulled. The note map-
ping in the treble (right hand) and bass (left hand) sec-
tions of a diatonic accordion is usually configured by its
manufacturer according to a requested keyboard layout
commonly referred to as “tablature”.
The FR-18 diatonic allows you to change the note con-
figuration of the treble and bass keyboards, because the
FR-18 diatonic has no real reeds and no corresponding
fixed mechanical parts inside. Consequently you can
swiftly set a certain keyboard layout by pressing a cou-
ple of buttons and handily change from one tablature to
another. (This is impossible on an acoustic diatonic
accordion.)
The FR-18 diatonic contains 12 tablatures. See page 54
for details. To recall any of them, either while practising
at home or during your performance:
1.
Press the [TABLATURE] button (it lights).
2.
Press a button in the first row of the treble
keyboard (see the silk-screened number
above it).
(In this example, we have decided to use tablature
number 4.)
You can now change the key of the selected tabla-
ture. See “Changing the key note of the keyboard” on
p. 32.
Selecting a tablature with its original key
The following procedure allows you to select the tabla-
ture’s original key.
1.
Press the [TABLATURE] button (it lights).
2.
Press the [KEY] button (it lights).
The first button row of the treble keyboard doesn’t
play.
3.
Use the first row in the button keyboard to
select the new tablature.
See the silk-screened numbers above the first row of
the treble button keyboard. The tablature you select
will use its factory-set key.
The [TABLATURE] and [KEY] buttons go dark.
Saving your preferred tablature
1.
Press and hold the [SET] register (it flashes
slowly).
The treble keyboard doesn’t play.
2.
Press the [TABLATURE] button (it lights).
The [SET] register flashes rapidly.
3.
Select the desired tablature by pressing a
button in the first row of the treble key-
board.
Button no. 4
FR-18d GB.book Page 33 Wednesday, December 15, 2010 1:54 PM

Table of Contents

Other manuals for Roland V-Accordion FR-18 diatonic

Related product manuals